How to adjust the pressure of the water pump inverter

Steps to adjust the pressure of the water pump inverter: 1. Turn on the PID closed-loop control; 2. Connect the pressure closed-loop; 3. Set the pressure feedback, set the given pressure; change the pump speed, you can change the water outlet pressure. Adjust the operating frequency of the inverter. The higher the frequency, the higher the pump speed and the higher the pressure. The operation method of the inverter can be seen in the manual.

The solar pump system consists of 3 parts:

1. Solar Panel

2. Solar pump inverter

3. Three-phase water pump

According to the intensity of sunlight, adjust the real-time nature of the output frequency to get the maximum power point tracking (MPPT) and maximize the use of solar energy.

pv inverter grid tie

Photovoltaic water pump can be used with drip irrigation, spray irrigation, seepage irrigation and other irrigation facilities to save water and save energy.

The current development direction of inverters is mainly high frequency, high performance, and

The MPPT control algorithm based on independent patented technology has the maximum MPPT tracking efficiency of more than 99%.

parallel connection. Technology, intelligence and digitization.

Inductive loads include refrigerators and washing machines with AC motors.

High conversion efficiency, quick start, low no-load current.

pv inverter off grid