SPC-2K2 Solar Pump Inverter

When selecting a suitable solar pump inverter, the following key factors must be considered to ensure that the system operates efficiently and safely:

1. Pump power matching
- Pump power: When selecting an inverter, you must first confirm the rated power of the pump and ensure that the inverter's power range matches the pump's requirements. In general, the output power of the inverter should be slightly higher than the maximum power of the pump to cope with possible power fluctuations.
- Voltage matching: Check that the voltages of the pump and the inverter (e.g. DC 48V, DC 96V, etc.) are the same. Different system voltages will affect the selection of inverters and battery packs.

2. System capacity and load adaptability
- System capacity: Select a suitable inverter according to the load requirements of the water pump. The capacity of the inverter should be able to adapt to the needs of the water pump when it is running at full load, and at the same time have a certain margin.
- Load fluctuation: When the load fluctuation of the water pump is large, the inverter should have good load adaptability to avoid frequent triggering of the overload protection mechanism.

3. System compatibility
- Compatibility: Ensure the compatibility of the inverter with the solar panels, energy storage batteries and water pumps used. The input voltage and output current of the inverter must match the requirements of the battery and water pump.
- Battery energy storage system: If the system must be equipped with batteries, choose an inverter that supports the energy storage system. The energy storage system can provide continuous power to the water pump when the sun is not sufficient.

single Phase ac Dc Hybrid Solar Water Pump Inverter Solar Pumping Water Systems