Notes for power frequency inverter

1) The operating environment of the UPS should be well ventilated to facilitate heat dissipation and keep the environment clean.

2) Do not bring perceptual load, such as money counting machine, fluorescent lamp, air conditioning, so as to avoid damage.

3) When the output load of the UPS is controlled at about 60%,#low frequency inverter the reliability is the highest.

4) If the UPS has a light load (for example, a 1000VA UPS has a 100VA load), the battery may be deeply discharged, and the battery service life may be reduced. Avoid this problem.

5) Appropriate discharge, #pure sine wave inverter contribute to the activation of the battery, such as long-term without mains power, every three months should be artificially cut off the UPS with load discharge, which can extend the service life of the battery.

6) For most small UPS, turn on the UPS at work, avoid starting with load when starting, and turn off the UPS when off work; #home power inverter The UPS in the network room must run all day because most networks work 24 hours a day.

7) The UPS should be charged in time after discharge to avoid battery damage due to excessive self-discharge.

LCD+LED display mode, can intuitively understand the current running state of the product and various running parameters.

Remote wire control switch port, through the remote switch, very convenient for users to switch the machine; WIFI intelligent monitoring function (optional).

Fully Safety Protections: Isolated Input/Output Design and Soft start tech. Inverter red light will be on and makes alarm’s sound and cut off the electricity automatically when Over voltage, Low voltage, Overload, Over current, Short circuit and Over heat.

pv solar power inverters