TDS series 10kva 7kw hybrid solar inverter
Function introduction
1. Charging control function: The AC power output by the wind turbine is first converted into DC power, and then the battery is charged with the solar cell. If the electric energy generated by the solar panel and the wind turbine exceeds the needs of the battery and the inverter energy, the power supply adopts the PWM (pulse width modulation) method to unload the excess energy steplessly. Under normal unloading conditions, it can ensure that the battery voltage is always stable at the floating charging voltage point, and only the excess electric energy is released to the unloading. Thus, the best charging characteristics of the battery are ensured, the electric energy is fully utilized, and the service life of the battery is ensured.
2. Inverter output function: After turning on the "inverter switch (IVT SWITCH)" on the front panel, the inverter converts the DC power of the battery into pure sine wave AC power, which is output by "AC OUTPUT".
3. Automatic voltage stabilization function: When the voltage of the battery pack fluctuates between the undervoltage point and the overvoltage point, and the load changes within the rated power, the device can automatically stabilize the output.
4. Overvoltage protection function: When the battery voltage is greater than the "overvoltage point", the device will automatically cut off the inverter output, the front panel LCD will display "overvoltage", and the buzzer will sound an alarm for ten seconds. When the voltage drops to the "overvoltage recovery point", the inverter resumes work.
Hot Tags: 10kva 7kw hybrid solar inverter, China, manufacturers, suppliers, factory, customized, quotation, low price, buy discount, pricelist
Send Inquiry
