pure sine wave 1kw 2kw 3kw 4kw 5kw 6kw solar inverter 12v 24v 48v

It has five control model.

AC priority mode: Inverter will use AC supply the load first ,then charge the battery , will not use the battery power to supply loads.

Battery priority mode: It mean the inverter will take power from battery to supply load. Once the battery voltage drop and run out power , inverter will auto switch to ac power . It will auto switch back to battery once the battery is fully charge by ac power. And mppt controller Continuously charge the battery ,which mean the in day time will mainly use solar power to supply load.

ECO mode: It’s pretty much as 01 mode, except it will auto shut down once the appliances total capacity under 15% of inverter capacity to save energy.

Generator mode : Meaning you could connect to diesel generator or oil generator to replace the grid city input . Since the unstable voltage output of generator . The inverer’s transformer will stablize the voltage then supply to appliances.

Unattended mode: Most important and innovative one is our unattended mode, it could use on island system and top of the mountain. Normally it work in battery mode, using ac or solar input to charge battery, once the ac/solar power is out and battery power run out . The inverter will auto shut down. But it will auto start when solar power or ac power charge the battery to the restore voltage. Which mean you dont have manual restart it. It will save lots of trouble and labour to keep the inverter working .

solar energy